How to fix a leaky pipe by connecting or patching the pipe is not an easy task. You should trust it in the hands of plumbing drain cleaning service. Before replacing a damaged pipe, make sure first whether the leak occurs in the pipe only or at the connection. This is because the different parts that leak is different as well as how to deal with them.
If a leak occurs at a pipe connection, the way to deal with a leaky pipe that must be done is to replace the damaged pipe connection with a new connection. At the time of replacing the connection, cover the joint with seal tape so that the connection is tighter while avoiding pipe leaks in the future.
Two ways can be done to overcome leaks that occur in the pipe body, namely by patching it or replacing the pipe as a whole. Patching is done if the damage is still on a small scale such as small holes or cracks. The way to fix the leaking pipe is to cut the pipe used for patching in a U shape; make sure the size is larger so that it can cover the leaking area. Apply special glue for PVC pipes on both pipes, then paste and hold until the pipe dries completely.
Meanwhile, pipe replacement is carried out when the leaking part is large enough and can no longer be patched. The trick is to cut the area of the leaking pipe, you should increase the cutting area by about 1 to 2 inches to avoid small leaks around the source of the leak. Make sure the pipe is completely dry of residual water. Then connect it with a new pipe of the same size using PVC glue or thread.
The last way to deal with leaking pipes is to make sure that the connections and fillings have been done correctly. Try turning on the water pump again and observe whether there is still water seepage or whether the water pump keeps turning on even though all the faucets and the water reservoir are full. If all conditions are okay, now is the time for you to cover the walls and floors again and trim them so they don’t look striped.
Comment here